Hi Vickie, I love that you’ve kept this fridge going for 22 years! You asked if it’s worth keeping, so let me give you an honest answer.
Your Kenmore 106 series was built by Whirlpool. The clue in what you described is that turning the cold control off and back on “brings it back to life”. That tells me the compressor isn’t getting the signal to start, even though it can still run and cool.
What’s most likely happening
- The cold control (thermostat): this is the dial you turn. After 20+ years, its contacts wear out and it sometimes doesn’t switch the compressor on. Turning it off and on jiggles it back into working. This is the most likely cause, and the part is cheap.
- The start relay: the small part on the side of the compressor that helps it start. When it’s failing, the compressor clicks and doesn’t start, then eventually catches.
- Dirty condenser coils: underneath or behind the fridge. Clean them either way; it helps any old fridge.
So, is it worth keeping?
If it’s the cold control or the relay, a small repair could keep it going a while longer. But a 22-year-old fridge is near the end of its life, and it uses a lot more electricity than a new one. If the compressor itself is failing, it isn’t worth fixing.
My advice: if you’re happy with it, a cheap control or relay repair is reasonable. But start shopping now, so you’re not forced to buy in a hurry if it quits completely. In the meantime, keep an eye on the freezer with a thermometer, and don’t store anything expensive in there. I hope that helps you decide!

