Technician Answers

Kenmore 795.77579600 refrigerator shuts off completely until it’s unplugged

Answered by GIR Technician, GIR Appliance Repair · November 16, 2026
❓ The question
Kenmore Refrigerator Model 795.77579600

“Refrigerator cycles off occasionally and I have to unplug to restart.”

For the past couple of months it cycles off completely. It will restart after I unplug it for 5 minutes of so. Is it repairable with parts need available?

Asked by Judy from CO · November 15, 2026
GIR Technician
GIR TechnicianAppliance technician · GIR Appliance Repair, The Woodlands, TX
✓ Technician answer

Hi Judy,

A fridge that just goes dead every so often and only wakes up after you pull the plug is frustrating, and it’s nerve-racking when you’ve got food inside. The good news is this pattern usually points to a fixable part, and your 795-series Kenmore was built by LG, so parts are generally still out there.

First, figure out what “off” looks like

Next time it happens, before you unplug it, take a quick look and listen:

  • Everything is dead – no display, no inside light, no fan noise. That points to the electronics or the power supply.
  • Lights and display still work, but it’s silent and warming up – that points to the compressor not restarting, or the board not telling it to.

Easy things to rule out

  1. Make sure it’s plugged straight into a wall outlet, not an extension cord or power strip, and that the plug fits snug. A loose or worn outlet can drop power for a moment and lock up the electronics.
  2. Pull the fridge out and make sure the back isn’t packed with dust and the floor area behind it has airflow. An overheated board or compressor can shut itself down.

The most likely culprit

On these LG-built refrigerators, when the whole unit goes completely dead and only comes back after a power reset, the usual cause is the main control board. It sits behind the cardboard or metal cover at the bottom of the back. With age, parts on the board (relays, capacitors, the power supply section) get weak and the board “freezes” until it’s powered down. Always unplug the fridge before taking that cover off.

If instead the lights stay on and only the cooling stops, the compressor may be struggling to restart. The board can still be the cause, but if it’s the compressor itself, that’s sealed-system work and a job for a technician only.

A replacement main board is a homeowner-friendly swap (a few plugs and screws). As a rough idea, these boards often run somewhere around $100–$250. If the fridge is otherwise cooling well, that’s usually worth doing. If it turns out to be the compressor on an older unit, that’s when I’d run the numbers with our repair-or-replace tool. I’ve listed the board below. You can check price and availability right there.

You might also find this earlier answer helpful: Kenmore 795 refrigerator with buttons and lights not working.

Once you’ve seen what it looks like the next time it shuts down, send a follow-up and I’ll help you narrow it down. Hope we get it running steady again soon!

🔧 Part needed
Main control board (PCB)
Fits Kenmore 795.77579600

If the whole fridge goes dark (no lights or display) and only comes back after unplugging. We'll match the exact part # to your 795.77579600.

Want us to get this part for you? We source genuine parts through our supplier network. Send a quick request and we'll email you the current price and availability, usually within one business day. No obligation.
Still stuck, or is your situation different?Ask your own question and a technician will answer it for free.
💬 Ask a Follow-Up Question
(346) 625-4289Tap to Call · Same-Day