Hi Judy,
A fridge that just goes dead every so often and only wakes up after you pull the plug is frustrating, and it’s nerve-racking when you’ve got food inside. The good news is this pattern usually points to a fixable part, and your 795-series Kenmore was built by LG, so parts are generally still out there.
First, figure out what “off” looks like
Next time it happens, before you unplug it, take a quick look and listen:
- Everything is dead – no display, no inside light, no fan noise. That points to the electronics or the power supply.
- Lights and display still work, but it’s silent and warming up – that points to the compressor not restarting, or the board not telling it to.
Easy things to rule out
- Make sure it’s plugged straight into a wall outlet, not an extension cord or power strip, and that the plug fits snug. A loose or worn outlet can drop power for a moment and lock up the electronics.
- Pull the fridge out and make sure the back isn’t packed with dust and the floor area behind it has airflow. An overheated board or compressor can shut itself down.
The most likely culprit
On these LG-built refrigerators, when the whole unit goes completely dead and only comes back after a power reset, the usual cause is the main control board. It sits behind the cardboard or metal cover at the bottom of the back. With age, parts on the board (relays, capacitors, the power supply section) get weak and the board “freezes” until it’s powered down. Always unplug the fridge before taking that cover off.
If instead the lights stay on and only the cooling stops, the compressor may be struggling to restart. The board can still be the cause, but if it’s the compressor itself, that’s sealed-system work and a job for a technician only.
A replacement main board is a homeowner-friendly swap (a few plugs and screws). As a rough idea, these boards often run somewhere around $100–$250. If the fridge is otherwise cooling well, that’s usually worth doing. If it turns out to be the compressor on an older unit, that’s when I’d run the numbers with our repair-or-replace tool. I’ve listed the board below. You can check price and availability right there.
You might also find this earlier answer helpful: Kenmore 795 refrigerator with buttons and lights not working.
Once you’ve seen what it looks like the next time it shuts down, send a follow-up and I’ll help you narrow it down. Hope we get it running steady again soon!

