Technician Answers

Samsung RF265ABPN freezer drawer handle came loose on the right end: can it be re-glued?

Answered by GIR Technician, GIR Appliance Repair · November 18, 2026
❓ The question
Samsung Refrigerator Model RF265ABPN Age: Over 12 years

“Freezer handle appears to be unglued”

The right side of the freezer handle seems to have come undone. There is no set screw on the bottom, like all the videos show. It is attached internally and looks like it was glued to the hinge mount. How do we fix this? Can it be fixed? Or is it just a re-glue and hope for the best?

Samsung Refrigerator photo 1 from the question
Asked by Heidi from TX · November 17, 2026
GIR Technician
GIR TechnicianAppliance technician · GIR Appliance Repair, The Woodlands, TX
✓ Technician answer

Hi Heidi,

Thanks for the photos. They show exactly what happened. You’re right that there’s no set screw at that end. The handle bar on your RF265ABPN is a hollow aluminum tube, and each end slips over a molded end post that comes out of the mounting block on the drawer. At the factory that joint is held by a snug fit plus adhesive. After 12+ years of people pulling a heavy freezer drawer open, the glue on the right end gave up and the tube slid off the post.

Can it be fixed?

Yes. Re-gluing is a fair fix, as long as the parts themselves aren’t damaged. Before you glue, check two things:

  • The end post. Look it over for cracks or chipped edges. If it’s cracked, glue won’t hold for long.
  • The left end. Wiggle it. If it’s loose too, glue both ends now so you don’t have to do this again next month.

How I’d re-glue it

  1. Scrape all the old adhesive off the end post and out of the tube. A small flat screwdriver or a utility blade works, but go easy on the plastic.
  2. Lightly scuff both surfaces with medium sandpaper, then wipe them with rubbing alcohol and let them dry. Clean, rough surfaces are what make the new glue grip.
  3. Use a two-part epoxy that’s rated for metal and plastic (the slower-setting kind is stronger than 5-minute epoxy). Plain super glue or household glue won’t stand up to the pulling.
  4. Coat the post and the inside of the tube end, then slide the tube back on fully. Make sure the bar lines up straight with the left side.
  5. Hold it in place with painter’s tape and wipe off any glue that squeezes out. Let it cure for the full time on the package, usually 24 hours. Until then, open the drawer by gripping the top edge of the door, not the handle.

Done carefully, this usually holds for years. A steady pull instead of a yank helps it last.

If gluing doesn’t hold

If the end post is cracked, or the epoxy lets go again, replace the freezer handle. Samsung sells it as a part for this model, and it’s a cheap fix compared with the refrigerator itself, so it’s well worth doing even on a fridge this age. When it arrives, check whether the end caps are included. I’ve listed the part below. We’ll confirm the exact part number for your model so you get the right handle.

If anything looks different once you get in there, send a follow-up with a photo and I’ll help you sort it out.

— GIR Technician

🔧 Part needed
Freezer drawer handle
Fits Samsung RF265ABPN

Only needed if the end post is cracked or re-gluing doesn't hold. We'll match the exact part # to your RF265ABPN.

Want us to get this part for you? We source genuine parts through our supplier network. Send a quick request and we'll email you the current price and availability, usually within one business day. No obligation.
Still stuck, or is your situation different?Ask your own question and a technician will answer it for free.
💬 Ask a Follow-Up Question
(346) 625-4289Tap to Call · Same-Day