Hi Pardeep,
Grinding noises are unnerving, but on an LG top-loader like your WT1501CW it’s often something simple: a coin or a bra wire stuck where it shouldn’t be. The most useful clue is when the grinding happens, so watch one load and note whether it’s during agitation, while it drains, or during the spin.
What I’d check first
Unplug the washer before you take anything apart.
- Look under the wash plate (pulsator). Pop off the center cap in the bottom of the drum, remove the bolt under it, and lift the plate out. Coins, hairpins, bra underwires and buttons love to get trapped under there and scrape as the plate turns.
- Check the drain pump if it grinds or rattles while draining. A small object can get into the pump and make a loud grinding or buzzing sound only when the water is being pumped out. If the pump is clear but still noisy, it’s worn out.
- Spin the empty tub by hand. With the lid open (and the washer unplugged), turn the drum slowly. It should turn smoothly and quietly. A rough, gritty rumble that gets louder at high spin speed points to the tub bearing.
- Listen at the switch from wash to spin. A grind or loud clunk right when the machine shifts into spin usually means a worn coupling on the drive shaft under the tub.
Repair or replace?
Debris, the drain pump and the coupling are all reasonable repairs, usually tens of dollars to a little over a hundred in parts (rough range). A failed tub bearing is a different story: on this design it’s a big, labor-heavy job, and on an older washer it’s often smarter to put that money toward a new one. Our repair-or-replace tool can help you decide.
If the grinding only happens while draining and the pump has nothing stuck in it, the drain pump is my pick. If the grind or clunk comes as it shifts into spin, it’s the coupling. I’ve listed the exact parts for your model below, so you can check price and availability right there.
Want us to take a look?
We’re a local company and we service Houston and we can often come out the same or next day. Call or text us at (346) 625-4289. If you text us a short video of the noise, the tech can bring the right part. See our washer repair and Houston service area pages.
If you can tell me when the noise happens, I’m happy to narrow it down. Just send a follow-up.

