Hi Chenell, I know you said you’ve checked everything, so let me go through what I’d look at, including a couple of spots people often miss.
First: is it really a problem?
Newer LG washers, both top-loaders and front-loaders, use much less water than older ones. They weigh the load and only add as much as they need. A top-loader with a small load can look like it barely put any water in. If your clothes are coming out clean and properly rinsed, it may be working as designed.
If the clothes aren’t getting wet or clean
- The filter screens in the hoses. This is the one people miss. Turn off the taps, unscrew the hoses from the back of the washer, and look inside the inlets. There are small mesh screens that get clogged with sand and rust. Clean them with a small brush.
- Both taps fully open, both hot and cold. LG washers fill slowly or stop with an IE error if either is weak.
- Kinked hoses behind the washer, especially if it was moved.
- Water pressure in the house. If other taps are also weak, that’s the cause.
If none of that helps
Then it’s usually the water inlet valve, which wears out and doesn’t open fully, or the water level (pressure) sensor that tells the washer how full it is. Both are common and reasonable repairs on an LG.
If the display shows an error code like IE or PE, send it to us and we can narrow it down even more. Good luck, Chenell!

