Technician Answers

Kenmore 110.26922502 Washer Lid Switch Part Number (Hinge Style)

Answered by GIR Technician, GIR Appliance Repair · October 30, 2026
❓ The question
Kenmore Washer Model 110.26922502 Age: Over 12 years

“What is the part number for the lid switch?”

This model has the door lid hinge engaging the lid switch when the lid is closed. It is different from models where a tab on the lid pushes down through an opening on the side of the washer top.
Thanks for your help!

Asked by Gary from MN · October 28, 2026
GIR Technician
GIR TechnicianAppliance technician · GIR Appliance Repair, The Woodlands, TX
✓ Technician answer

Hi Gary, thanks for coming back and for the correction, that’s a really useful detail. You’re right: on your Kenmore 110.26922502 the lid switch isn’t pushed by a tab through a slot. The lid hinge turns a small actuator, and that’s what closes the switch. So the striker check from my first answer doesn’t apply to your washer.

How to get the exact part number

  • Read it off the switch itself. Unplug the washer, release the top (on most of these the console or top panel lifts after you take out two screws or pop two clips), and look at the switch next to the hinge. The part number is almost always printed on the switch body or its harness.
  • Use the full model number on a parts diagram. Put 110.26922502 into Sears PartsDirect (or any appliance parts site that has Kenmore diagrams) and open the “Top and lid” or “Cabinet” section. Look for “switch, lid” with the hinge actuator drawn next to it. Always go by your full model number, because Kenmore used several different switches in the 110 series.

Before you order, test it

With the washer unplugged, take the two wires off the switch and put a multimeter on continuity. Move the lid between open and closed. You should see the switch open and close cleanly. If it never closes, or flickers, it’s bad. If it tests fine, look at the hinge actuator: on these hinge-style setups the plastic actuator or the hinge itself often wears or cracks, so the switch never gets fully pressed even though it’s fine.

It’s a cheap part and worth fixing on a washer like yours. If you find the number on the switch and want me to double-check it before you order, just send it through the form and I’ll take a look.

Still stuck, or is your situation different?Ask your own question and a technician will answer it for free.
💬 Ask a Follow-Up Question
(346) 625-4289Tap to Call · Same-Day