Hi Angela, the sunken button is a real clue, but it might not be the whole story. Let’s go through it.
The power button
On your LG DLEX8100V, the power button is a plastic cap that presses a tiny switch on the display board behind it. When the cap sinks in and stays there, it either broke its little spring tab or it’s pressing the switch the wrong way. That explains why it worked for a while after it sank and then stopped: the switch can’t “click” anymore. That part is fixable: either the button cap or the display (control) board, depending on whether the switch itself got damaged.
But check these first, because “totally dead” has other causes
- Both breakers. An electric dryer uses a double breaker. One half can trip on its own, and some dryers act completely dead. Flip it fully off and back on.
- The thermal fuse. On many LG electric dryers, a blown thermal fuse makes the whole dryer go dead, display and all. It blows when the dryer overheats, usually because of a clogged vent or lint trap housing. If you have a multimeter, it’s on the back of the blower housing and should read continuity. If it’s blown, clean the vent all the way outside before you replace it, or the new one will blow too.
- The power cord connection. With the breaker off, take off the small cover on the back where the cord connects. Look for burnt or loose wires. That’s a fire risk and worth checking anyway.
Here’s a quick way to tell: if the display shows absolutely nothing, not even a flicker when you press other buttons, look at the fuse and power first. If other buttons light up something but power won’t start it, the button or board is your problem. At 4 to 7 years old, this dryer is definitely worth fixing. Let me know what you find!

