Technician Answers

Kenmore 110 top-load washer shakes, tub loose, walks off its platform: how old is it?

Answered by GIR Technician, GIR Appliance Repair · November 7, 2026
❓ The question
Kenmore Washer Model 110.70222511

“How old is this machine”

Basin loose and entire washer shakes and moves off of wooden platform that it is on.

Asked by Paul from NJ · November 6, 2026
GIR Technician
GIR TechnicianAppliance technician · GIR Appliance Repair, The Woodlands, TX
✓ Technician answer

Hi Paul, a tub that feels loose plus a washer that walks across the floor is a very common combination, and it’s usually a fixable one.

First, the model number

Kenmore models starting with 110 were built by Whirlpool. I can’t find a 110.70222511, but 110.20222511 is a common Kenmore top-loader, so the 7 may really be a 2 on the tag. Please double-check it, because the right parts depend on it.

How old is it?

The model number doesn’t give the date. The serial number does. It’s on the same tag, usually under the lid or on the back of the top panel. On Whirlpool-built Kenmores, the first letter is the factory, the second letter is the year and the next two digits are the week. Type it into our Kenmore age lookup and it decodes it for you, or send it to me and I’ll do it.

Why the tub feels loose and it shakes

On these washers the inner tub hangs from four suspension rods with springs and dampers at the bottom. When those wear out, the tub swings around freely, bangs during spin and the whole machine starts walking. Here’s a quick test: with the washer empty, push down on one side of the tub and let go. A healthy tub settles right away. A worn one drops low, bounces several times or clunks against the cabinet.

The wooden platform matters too

A platform that flexes even a little makes any shaking much worse. Make sure it’s solid, level and that all four feet of the washer sit firmly on it with the front legs locked. Non-slip pads under the feet help keep it from creeping.

Is it worth fixing?

Suspension rods are usually sold as a set of four and are one of the cheaper washer repairs. If the rest of the washer works well, it’s a sensible fix. I’ve added the kit below; send me the confirmed model number and we’ll match the exact one.

🔧 Part needed
Suspension rod kit (set of 4)
Fits Kenmore 110.70222511

If the tub drops or swings freely when you push it and bounces more than once. We'll match the exact kit to your Kenmore model.

Want us to get this part for you? We source genuine parts through our supplier network. Send a quick request and we'll email you the current price and availability, usually within one business day. No obligation.
Still stuck, or is your situation different?Ask your own question and a technician will answer it for free.
💬 Ask a Follow-Up Question
(346) 625-4289Tap to Call · Same-Day