Technician Answers

Thermador T24IR9055SP ice maker not getting water, but the door dispenser works

Answered by GIR Technician, GIR Appliance Repair · November 10, 2026
❓ The question
Thermador Refrigerator Model T24IR9055SP/04 Age: 4–7 years

“no water going in to make ice. however there is water supplied in the door”

Asked by Tom from MI · November 7, 2026
GIR Technician
GIR TechnicianAppliance technician · GIR Appliance Repair, The Woodlands, TX
✓ Technician answer

Hi Tom,

The door dispenser still working is a useful clue: your house supply, water line and filter are fine. The problem is somewhere on the ice maker's own branch of the system, and there are three usual suspects.

1. A frozen fill tube (most common)

Water enters the ice maker through a small tube at the back of the ice tray. If a fill ever dribbled slowly, it can freeze into a plug right there, and then no more water gets through. Look at the spot where the water drops into the tray. If you see ice built up in the tube opening, thaw it with a hair dryer on low (keep it moving, and don't melt the plastic) or a turkey baster with warm water. Then make sure the freezer holds around 0°F so it doesn't refreeze.

2. The ice maker is switched off or not asking for water

Make sure the ice maker is turned on in the control panel and that the shut-off arm or sensor isn't blocked by cubes stuck in the bin. If the tray is empty and dry, the ejector arm doesn't move, and it never tries to fill, the ice maker itself may have failed.

3. The ice maker side of the water valve

On most fridges with both a dispenser and an ice maker, the water valve has a separate section (its own coil) for each, so one side can fail while the other keeps working. When the ice maker is due to fill, you should hear a short buzz from the valve, usually at the bottom back of the unit. If the ice maker cycles (the arm turns) but the valve is silent and the tube isn't frozen, the ice maker coil on the valve is the likely problem. A technician can confirm it with a quick meter check.

What I'd do

Start with the fill tube, since it's free and fixes this most often. If the tube is clear and the tray stays dry, watch whether the ice maker arm turns: if it turns and no water comes, it points to the valve; if nothing moves at all, it points to the ice maker.

I've listed both parts below as the two competing causes. We'll match the exact part numbers to your model, and you can check price and availability right there. For a similar case on another brand, see this ice tray not filling answer.

If you get stuck or see something different, send a follow-up and let me know what the ice maker does when it cycles. Hope you're back to full ice trays soon!

🔧 Part needed
Water inlet valve
Fits Thermador T24IR9055SP/04

If the ice maker arm turns but the valve stays silent and the fill tube isn't frozen. We'll match the exact part # to your T24IR9055SP/04.

Ice maker assembly
Fits Thermador T24IR9055SP/04

If the ice maker is on, the tray is dry and the arm never moves to start a cycle. We'll match the exact part # to your T24IR9055SP/04.

Want us to get this part for you? We source genuine parts through our supplier network. Send a quick request and we'll email you the current price and availability, usually within one business day. No obligation.
Still stuck, or is your situation different?Ask your own question and a technician will answer it for free.
💬 Ask a Follow-Up Question
(346) 625-4289Tap to Call · Same-Day