Technician Answers

Kenmore 796.69272000 dryer has no power after a power surge

Answered by GIR Technician, GIR Appliance Repair · November 10, 2026
❓ The question
Kenmore Dryer Model 79669272000 Age: 4–7 years

“No power righr after power surge. How to fix?”

No power ro dryer day after powerebsurge. Was working perfectly day before .

How to fox this? Trouble shoot ?

Kenmore Dryer photo 1 from the question
Asked by BARBARA from TX · November 9, 2026
GIR Technician
GIR TechnicianAppliance technician · GIR Appliance Repair, The Woodlands, TX
✓ Technician answer

Hi Barbara,

Sorry about the surge. Thanks for the photo of the tag, it helps a lot. Your Kenmore 796 dryer was built by LG, and the tag even shows it has a 15 amp fuse on its circuit board. That matters here.

1. Check the breaker and reset it

An electric dryer runs on a double breaker. A surge can trip it partway, so it may look "on" when it isn't. Flip that breaker firmly all the way off, then back on. If you have a whole-home surge protector at the panel, make sure it hasn't tripped too.

Then unplug the dryer (or leave the breaker off) for 5-10 minutes so the control fully resets, then try it again. Sometimes a surge just locks up the control and this brings it back.

2. The board fuse and the control board

If it's still completely dead, the next likely suspect is that 15 amp fuse on the main control board. A surge is exactly the kind of thing that blows it. With the power off, a technician can open the control area and test the fuse. If the fuse is blown and the board shows no burnt spots, replacing the fuse can bring it back. If the board looks scorched, the main control board needs to be replaced.

3. The thermal fuse

On many LG-built dryers, a blown thermal fuse (on the back, near the exhaust) will also leave the dryer completely dead. It's less likely after a surge, but it's a cheap part and easy to test for continuity with a meter. While you're back there, make sure the vent isn't clogged.

Always unplug the dryer before opening any panel. I've listed the control board and the thermal fuse below, matching steps 2 and 3. You can check price and availability right there. Our LG dryer no-power answer covers another case that's worth a look.

If it's still dead after the breaker and reset, send a follow-up and tell me what you found.

Want us to take a look?

We're a local company that services Cypress and northwest Houston, and we can often come out same or next day. Call or text (346) 625-4289, and if you can, text a short video of what happens when you press power so the tech brings the right part. More on our washer and dryer repair and service in Cypress.

🔧 Part needed
Main control board
Fits Kenmore 79669272000

If the breaker and reset don't help and the board fuse is blown or the board looks scorched. We'll match the exact part # to your 796.69272000.

Thermal fuse
Fits Kenmore 79669272000

If the board looks fine but the thermal fuse tests open (no continuity). We'll match the exact part # to your 796.69272000.

Want us to get this part for you? We source genuine parts through our supplier network. Send a quick request and we'll email you the current price and availability, usually within one business day. No obligation.
Still stuck, or is your situation different?Ask your own question and a technician will answer it for free.
💬 Ask a Follow-Up Question
(346) 625-4289Tap to Call · Same-Day