Hi Sue,
Good call checking the filter first. That rules out the most common clog. When the arm won’t spin and nothing sprays, either no water is coming in, or the water is there but the pump isn’t pushing it up to the arms. One quick look tells you which.
Step 1: Is water getting in?
Start a normal cycle. Wait about 2 minutes, then open the door and look at the bottom around the filter.
- Dry, or only a little water: it isn’t filling. Make sure the water valve under the sink is fully open. If the kitchen was worked on lately, check the supply line for kinks.
- Still no water with the supply on: the water inlet valve has likely failed. It’s behind the lower kick panel at the front.
- Check the base pan too. Bosch dishwashers have a leak float in the base. If water has collected there, the machine stops filling to protect your floor. A leak like that needs fixing first.
Step 2: Water is there but nothing sprays
Then the problem is circulation. On Bosch, the wash pump and heater are one unit, often called the heat pump.
- Pull the lower spray arm and rinse out its holes. Make sure the filter assembly is twisted fully back into place, or the arm can’t spin.
- Listen during the wash. A hum with no water moving, or a pump that stays silent, points to a failed circulation pump. That’s a common wear item on Bosch dishwashers this age.
I’ve listed both possible parts below, and we’ll match the exact part number to your model. Turn off the breaker and the water before you remove the kick panel. For a similar case on another brand, see dishwasher fills but the wash motor won’t run.
Repair or replace?
Your dishwasher is over 12 years old. An inlet valve is an inexpensive fix. A circulation pump is roughly $150–$300 for the part. That’s still often worth doing on a Bosch like yours that’s otherwise in good shape, but our repair-or-replace tool can help you weigh it.
Let me know what you see at the bottom after 2 minutes, and if there’s any code on the display. Just send a follow-up.

