Technician Answers

Frigidaire FFTW4120SW1 washer makes a grinding noise while washing

Answered by GIR Technician, GIR Appliance Repair · November 15, 2026
❓ The question
Frigidaire Washer Model FFTW4120SW1

“Why is it making grinding noise while washing”

About a week r

Asked by Ulysses from GA · November 14, 2026
GIR Technician
GIR TechnicianAppliance technician · GIR Appliance Repair, The Woodlands, TX
✓ Technician answer

Hi Ulysses,

A grinding noise that started about a week ago is worth checking now, before it gets worse. On your Frigidaire FFTW4120SW1 the agitator is driven by a motor, a ribbed belt and a clutch (drive) assembly under the tub, so the noise usually comes from something caught in the tub or from one of those drive parts. Here’s how I’d narrow it down, easiest first.

1. Look for something caught in the tub

This is the most common cause, and the cheapest. Coins, bobby pins, bra underwires and small buttons slip between the inner and outer tub, or get under the agitator, and grind while it twists back and forth.

  • Unplug the washer and run your hand around the holes in the stainless tub and around the bottom of the agitator.
  • Pop off the agitator cap, take out the bolt under it and lift the agitator out. Check under it and around the shaft for anything stuck, and look for cracked or chewed plastic.
  • Spin the empty tub by hand and listen. If it scrapes in one spot, something is likely still trapped between the tubs.

2. Check the belt and motor pulley

With the washer unplugged and the water off, tip it back against a wall (get a helper) so you can see underneath. Look at the ribbed belt: if it’s frayed, cracked, glazed shiny or loose, it’ll slip and chatter during wash. Also make sure the motor pulley is tight on its shaft and the motor sits firm in its rubber mounts.

3. Check the clutch (drive) assembly

If the tub is clear and the belt looks good, turn the drive pulley slowly by hand and feel for roughness or grinding, and look for water or rust streaks around the shaft. A rough, gritty feel or a leak there means the clutch assembly is wearing out. That’s the bigger repair. On a newer washer it’s usually worth doing, but if yours has other problems too, run it through our repair-or-replace tool before you buy the part.

If the noise only happens while it’s draining, not while it’s agitating, check the drain pump for a coin or piece of plastic.

I’ve listed the exact belt and clutch for your model below, so you can check price and availability right there. Buy the belt only if it’s worn, and buy the clutch only if the drive feels rough with a good belt. If the washer is still under the manufacturer warranty, go through Frigidaire first.

Let me know what you find, or if the noise changes, and send a follow-up.

— GIR Technician

🔧 Part needed
Drive belt (ribbed)
Part # 5304516132 Fits Frigidaire FFTW4120SW1

If the belt is frayed, cracked, glazed or loose when you check under the washer.

Clutch (drive) assembly
Part # 5304516133 Fits Frigidaire FFTW4120SW1

If the tub is clear and the belt is good, but the drive feels rough or grinds when you turn it by hand.

Want us to get this part for you? We source genuine parts through our supplier network. Send a quick request and we'll email you the current price and availability, usually within one business day. No obligation.
Still stuck, or is your situation different?Ask your own question and a technician will answer it for free.
💬 Ask a Follow-Up Question
(346) 625-4289Tap to Call · Same-Day