Hi Denise, a dishwasher that starts running by itself is unsettling, but on a Bosch like your SHEM63W55N it usually has a clear cause. E16 points to water getting in when the machine didn’t ask for it, which nearly always means the water inlet (fill) valve isn’t closing all the way.
Why it “runs on its own”
When unwanted water trickles in and reaches the base, the dishwasher’s protection kicks in and runs the drain pump to get rid of it. So it sounds like it’s running even though nobody started it. It’s protecting your kitchen, not malfunctioning at random. If you’ve also seen E15 (water in the base), it fits the same story: the extra water overflows into the base pan.
A quick test you can do
- Turn off the water to the dishwasher, usually the hot-water valve under the kitchen sink.
- Leave it off for a few hours. If the dishwasher stops running on its own and the code doesn’t come back, the fill valve is letting water by.
- Keep the water off between loads until it’s fixed. That’s the safest way to use it in the meantime.
The fix
The inlet valve sits at the front bottom of the machine, behind the toe kick, where the supply line connects. It’s a moderately priced part and a common DIY repair if you’re handy: shut off the power and water, swap the valve, and check the connection for drips before you put the panel back. Order it by your full model number, including the /13 at the end, since Bosch changed parts between versions.
On a dishwasher 4 to 7 years old, this is well worth fixing. If the code comes back even with the water off, let me know, because that would point somewhere else and I’ll help you look.

