Technician Answers

Bosch SHX68R55UC dishwasher turns on but the spray arm won’t spin and no water sprays

Answered by GIR Technician, GIR Appliance Repair · November 10, 2026
❓ The question
Bosch Dishwasher Model SHX68R55UC/63 Age: Over 12 years

“Why is water not dispersing from spinner & spinner not spinning?”

Started 3 days ago. Checked filter on bottom of dishwasher & is clear. Spinner is not spinning & no water is dispersing from spinner. Dishwasher does turn on.

Asked by Sue from CA · November 9, 2026
GIR Technician
GIR TechnicianAppliance technician · GIR Appliance Repair, The Woodlands, TX
✓ Technician answer

Hi Sue,

Good call checking the filter first. That rules out the most common clog. When the arm won’t spin and nothing sprays, either no water is coming in, or the water is there but the pump isn’t pushing it up to the arms. One quick look tells you which.

Step 1: Is water getting in?

Start a normal cycle. Wait about 2 minutes, then open the door and look at the bottom around the filter.

  • Dry, or only a little water: it isn’t filling. Make sure the water valve under the sink is fully open. If the kitchen was worked on lately, check the supply line for kinks.
  • Still no water with the supply on: the water inlet valve has likely failed. It’s behind the lower kick panel at the front.
  • Check the base pan too. Bosch dishwashers have a leak float in the base. If water has collected there, the machine stops filling to protect your floor. A leak like that needs fixing first.

Step 2: Water is there but nothing sprays

Then the problem is circulation. On Bosch, the wash pump and heater are one unit, often called the heat pump.

  1. Pull the lower spray arm and rinse out its holes. Make sure the filter assembly is twisted fully back into place, or the arm can’t spin.
  2. Listen during the wash. A hum with no water moving, or a pump that stays silent, points to a failed circulation pump. That’s a common wear item on Bosch dishwashers this age.

I’ve listed both possible parts below, and we’ll match the exact part number to your model. Turn off the breaker and the water before you remove the kick panel. For a similar case on another brand, see dishwasher fills but the wash motor won’t run.

Repair or replace?

Your dishwasher is over 12 years old. An inlet valve is an inexpensive fix. A circulation pump is roughly $150–$300 for the part. That’s still often worth doing on a Bosch like yours that’s otherwise in good shape, but our repair-or-replace tool can help you weigh it.

Let me know what you see at the bottom after 2 minutes, and if there’s any code on the display. Just send a follow-up.

🔧 Part needed
Circulation pump with heater (heat pump)
Fits Bosch SHX68R55UC/63

If water fills the bottom but nothing sprays and you hear only a hum or no wash motor. We'll match the exact part # to your SHX68R55UC/63.

Water inlet valve
Fits Bosch SHX68R55UC/63

If the water supply is on but no water comes in during the fill. We'll match the exact part # to your SHX68R55UC/63.

Want us to get this part for you? We source genuine parts through our supplier network. Send a quick request and we'll email you the current price and availability, usually within one business day. No obligation.
Still stuck, or is your situation different?Ask your own question and a technician will answer it for free.
💬 Ask a Follow-Up Question
(346) 625-4289Tap to Call · Same-Day