Hi Stephanie, thanks for the photo of the label, that helps a lot. Your Frigidaire FFMV164LSA was made in May 2016, so it’s about nine and a half years old.
A microwave that trips the breaker is telling you something is drawing way too much power or shorting. Before anything else, one safety note: please don’t open the cabinet yourself. Microwaves have a high-voltage capacitor inside that can hold a dangerous charge even when unplugged.
First, notice when it trips
- The moment you plug it in or flip the breaker back on: that usually points to a shorted part that’s always powered, like the control board or a wiring problem.
- When you open or close the door: this is the classic sign of a failed door switch. There are three of them, and one is a safety “monitor” switch whose whole job is to short the circuit if the others fail. A worn door latch can trigger it.
- Only when you press Start: now we’re in the high-voltage parts: the magnetron, the high-voltage diode or the capacitor.
Check the circuit too
Since the stove still works, the range and microwave are likely on separate circuits, which is how it should be. An over-the-range microwave like yours needs its own 20-amp circuit. If anything else was recently added to that breaker, or the breaker itself is old and weak, it can trip under the microwave’s normal 1,550 watts.
Repair or replace?
If it’s a door switch, that’s an inexpensive fix and worth doing. If it turns out to be the magnetron or another high-voltage part, I’d honestly lean toward replacing it. At almost 10 years old, those repairs often cost close to what a new over-the-range unit does. Hope this helps you narrow it down, and if you have more questions, just send them in.


