Technician Answers

Frigidaire FGEF3044KFC oven won’t heat up to or hold the set temperature

Answered by GIR Technician, GIR Appliance Repair · November 10, 2026
❓ The question
Frigidaire Oven / Range Model FGEF3044KFC

“Why is my oven to heating up to set temperature?”

Problem started yesterday (Saturday). Oven did not preheat or stay heated to set temperature. Tried resetting clock on oven. Let it sit overnight and tried it again today.
Worked fine on Thursday when I made runza sandwiches. In fact, it must have worked earlier Saturday afternoon when I baked brownies. I then waited an hour; set the pre-heat to 400 degrees, but if it hit 400 the oven sure did not maintain the 400 degrees. The pizza was not done in the regular 20 minutes.
Not sure how old it is. From research it says it could be 2020 or 2010 model. I am pretty sure it is NOT the 2020 model.

Asked by Cynthia from NE · November 8, 2026
GIR Technician
GIR TechnicianAppliance technician · GIR Appliance Repair, The Woodlands, TX
✓ Technician answer

Hi Cynthia,

Brownies fine in the afternoon, pizza underdone that evening: that sudden change is actually a helpful clue. Ovens don't usually drift slowly out of whack; something stopped working, and on a Frigidaire electric range the bake element is the first thing I'd look at.

1. Check the bake element

When you preheat, the oven uses both the bake element (bottom) and the broil element (top). If the bake element fails, the broil element can still warm things up partway, so the oven gets warm but can't reach or hold 400°F. Try this:

  1. Set Bake to 350°F and wait 3-4 minutes. If the element on the oven floor is visible, it should glow red. If your oven has a smooth floor (a hidden element), feel for heat coming up from the bottom, or try Broil and compare.
  2. Turn the oven off and let it cool, then look at the element closely. A burned spot, blister, or break means it's bad.

Always turn off the breaker before removing an element. It's held by two screws at the back wall and is an easy swap for most people.

2. If the element looks fine: the temperature sensor

The thin probe sticking out of the upper back wall tells the control how hot it is. If it's reading wrong, the oven shuts off the heat too early. With the breaker off, a technician (or a handy homeowner with a meter) can check it: on Frigidaire ovens it should read about 1,100 ohms at room temperature.

Resetting the clock was a good idea, but this usually isn't a control problem, so I wouldn't buy a board first. I've listed the bake element and the sensor below as the two likely parts. You can check price and availability right there. There's also a similar case on a Frigidaire-built Kenmore oven.

About its age

Your instinct is right that it's not a 2020 model. To pin it down, open the storage drawer and look for the serial tag on the frame. Frigidaire serials usually start with two letters, then a digit for the year and two digits for the week. Send me that number and I'll read it for you. Either way, an element or a sensor is a very reasonable repair on this range.

Let me know what you find. Send a follow-up and I'll help with the next step. Hope you get back to perfect pizza soon!

🔧 Part needed
Bake element
Fits Frigidaire FGEF3044KFC

If the bottom element doesn't heat on Bake or shows a burned spot or break. We'll match the exact part # to your FGEF3044KFC.

Oven temperature sensor
Fits Frigidaire FGEF3044KFC

If the bake element heats but the oven still won't hold temperature. We'll match the exact part # to your FGEF3044KFC.

Want us to get this part for you? We source genuine parts through our supplier network. Send a quick request and we'll email you the current price and availability, usually within one business day. No obligation.
Still stuck, or is your situation different?Ask your own question and a technician will answer it for free.
💬 Ask a Follow-Up Question
(346) 625-4289Tap to Call · Same-Day