Technician Answers

Kenmore 110.78722700 gas dryer squeaks with a high-pitched noise that comes and goes

Answered by GIR Technician, GIR Appliance Repair · November 12, 2026
❓ The question
Kenmore Dryer Model 110.78722700 Age: Over 12 years

“Why is my dryer squeaking with a high pitch sound that comes and goes?”

Has been going on for several months. It has a very high pitch loud squeaking that starts and stops. Is not continuous. I was wondering if it is worth repairing. I live in Gallup, NM where we do not have many (if any) repairmen to do the work. They may have to come from another nearby town (Grants, Albuquerque or Farmington).

Kenmore Dryer photo 1 from the question
Asked by Donna from NM · November 12, 2026
GIR Technician
GIR TechnicianAppliance technician · GIR Appliance Repair, The Woodlands, TX
✓ Technician answer

Hi Donna,

An on-and-off squeal like that is very common on this dryer, and it’s almost always a worn moving part, not anything serious. Your Kenmore 110 series is built by Whirlpool, and this design is one of the easiest to fix yourself, which helps when the nearest tech is a long drive away.

What usually causes that on-and-off squeal

  • Idler pulley – the small wheel that keeps the belt tight. When its bearing dries out it squeals in bursts, often worse at the start of a load or as the drum warms up. This is my first suspect.
  • Drum support rollers – two rollers at the back hold up the drum. Worn rollers or dry roller shafts give a high squeak that comes and goes as the drum turns.
  • Front drum glides – plastic/felt pads the front of the drum rides on. Once they wear through, the drum rubs metal on metal and squeaks.
  • Less often, the drive motor bearings start to whine. That’s a steadier sound that follows the motor, not the drum.

How to tell which one it is

  1. Safety first: unplug the dryer and turn the gas shutoff valve behind it to off. Move it gently so you don’t strain the gas line.
  2. Open the top: two clips under the front edge of the lid release with a putty knife, then the front panel lifts off so you can see the belt, idler and drum.
  3. Slip the belt off the motor pulley and idler. Spin the idler by hand. If it’s rough, wobbly or squeaks, that’s your noise.
  4. Now turn the drum by hand. If the drum itself squeaks or feels draggy, it’s the rear rollers or the front glides.
  5. Spin the motor pulley too. If it’s gritty or noisy, the motor bearings are going.

While it’s open, vacuum out the lint around the burner and motor. That’s good fire prevention on any older gas dryer.

Is it worth repairing?

Honestly, yes, as long as it heats and dries well. An idler pulley or a roller kit is usually a rough $20–$60 part and many people swap the idler, rollers and belt together in an afternoon. If it turns out to be the motor, or the dryer has other problems too, you can run the numbers with our repair or replace calculator. Here’s a similar case we covered: Whirlpool dryer belt squeals when it starts tumbling.

I’ve listed the parts below. You can check price and availability right there. If you open it up and aren’t sure what you’re seeing, send a follow-up with a photo and I’ll help you narrow it down.

Take care,
The GIR Technician

🔧 Part needed
Idler pulley
Fits Kenmore 110.78722700

If the idler wobbles or squeaks when you spin it by hand. We'll match the exact part # to your 110.78722700.

Drum support roller kit
Fits Kenmore 110.78722700

If the idler spins smooth but the drum squeaks when turned by hand. We'll match the exact part # to your 110.78722700.

Want us to get this part for you? We source genuine parts through our supplier network. Send a quick request and we'll email you the current price and availability, usually within one business day. No obligation.
Still stuck, or is your situation different?Ask your own question and a technician will answer it for free.
💬 Ask a Follow-Up Question
(346) 625-4289Tap to Call · Same-Day