Hi Sherise,
A dryer that still dries but has started thumping or rumbling is giving you a heads-up. Good news: the usual causes on an LG gas dryer are wear parts that aren't expensive, and catching them early keeps them from damaging the belt or drum.
First, the easy check
Empty the drum and run your hand around it. Look for coins, a bra wire, or a button caught between the drum and the front edge. Those can make a loud scraping or knocking noise, and pulling one out fixes it on the spot. Also check that the dryer sits level and doesn't rock on its feet.
What's most likely wearing out
- Idler pulley. This keeps the belt tight. When its bearing wears, you get a squeal, chirp, or grinding noise that often sounds like a loose belt. It's the part I'd suspect first given how you describe it.
- Drum rollers. The back of the drum rides on two rollers. When they wear flat, you get a rhythmic thump-thump or rumble on every turn.
- Front drum glides. Felt or plastic pads at the front. When they wear through, you hear scraping metal and may see black marks on clothes.
How to tell which one
Unplug the dryer and turn off the gas valve behind it before opening any panels. Then turn the drum slowly by hand. Rough spots, a thump on each rotation, or scraping usually mean rollers or glides. With the panel off, spin the idler pulley with your finger: it should turn smoothly and quietly, with no wobble. A wobble or grinding means it's done. Many people replace the rollers, idler, and belt together since they're all in there anyway.
I've listed the idler pulley and the drum roller below, matching the two most likely causes. You can check price and availability right there. For a similar noise on another brand, see this loud tumbling noise answer.
Is it worth fixing?
Almost always, yes. These are inexpensive parts, and LG dryers are solid machines otherwise. If you tell me which noise it is (squeal, thump, or scrape), I can narrow it down further. Just send a follow-up.
Hope it's quiet again soon!

