Hi Tracy,
Wanting to know the capacity before you buy detergent pods or decide what bedding will fit makes total sense. I don’t want to give you a number I can’t confirm for your exact model, so here’s where you can find the official one, plus a quick way to measure it yourself.
What your model number tells us
On Kenmore appliances the three digits before the dot show who built the machine. 110 means your Kenmore 600 washer was built by Whirlpool. The rest of the number, 29622800, is the specific Kenmore model, and that’s what the capacity rating is tied to.
Where to find the official capacity
- The owner’s manual. If you don’t have the paper copy, search online for “Kenmore 110.29622800 owner’s manual”. The capacity in cubic feet is usually listed on the specifications page or the front cover.
- The model and serial tag. On most Whirlpool-built top loaders it’s under the lid, on the back edge of the cabinet, or on the back of the console. Some tags include the capacity, but many don’t.
- The original receipt or Sears order history. If it was bought from Sears, the product listing almost always showed the capacity.
Measure it yourself in two minutes
If you’d rather not dig for paperwork, you can get a close estimate with a tape measure:
- Measure across the inside of the basket (the diameter) in inches.
- Measure the depth from the top of the basket down to the bottom (above the agitator or wash plate).
- Half the diameter is the radius. Multiply 3.14 × radius × radius × depth to get cubic inches.
- Divide by 1,728 to convert to cubic feet. If you have a center agitator, the usable space will be a bit less.
Manufacturers use a standard test method to rate capacity, so your result may differ slightly from the official figure, but it will tell you whether you’re closer to a regular or a large-capacity tub.
If you’d like help, send a follow-up with your two measurements and I’ll do the math for you.
Take care,
GIR Technician

