Technician Answers

Roper RAS8445JQ0 Washer Leaking Oil: Repair or Replace?

Answered by GIR Technician, GIR Appliance Repair · October 28, 2026
❓ The question
Whirlpool Washer Model RAS8445JQ0 Age: Over 12 years

“Our Whirlpool by Roper top-loading washing machine is leaking oil on our tile floor, is it time to invest in a new machine?”

Possible transmission oil seal issue versus "grease from bearings;" there have been strange "noises," especially between cycles and at conclusion. Additionally, the sensor to the top lid has been temperamental, which affects the continuation of various cycles. Thank you for your time and consideration.

Asked by David from FL · October 26, 2026
GIR Technician
GIR TechnicianAppliance technician · GIR Appliance Repair, The Woodlands, TX
✓ Technician answer

Hi David, thank you for the clear description, and I’m sorry you’re dealing with an oily floor. I’ll be honest with you, since you asked if it’s time for a new machine.

What the oil means

Your Roper RAS8445JQ0 is a Whirlpool-built direct-drive top-loader. Underneath it there’s a transmission (the gearcase) that is filled with oil. Oil on the floor, along with new noises, almost always means the transmission seal is leaking or the transmission itself is wearing out. As it loses oil, it gets noisier and eventually stops agitating or spinning properly.

Grease from the bearings doesn’t usually make a puddle. Oil on tile is almost always the transmission.

Is it worth repairing?

A transmission replacement on this washer is possible, and these are well-built machines. But with the part plus labor, you’d be spending a good share of a new washer’s price on a machine that is already 12+ years old. You also mentioned the lid switch acting up, and that would be one more repair on top of it.

My honest advice: this is the right time to replace it. If you’re handy and want to keep it going a little longer, the lid switch on its own is cheap and easy, but it won’t fix the leak.

Until then

  • Put a tray or towels underneath it so the oil doesn’t soak into grout.
  • Don’t overload it, since heavy loads strain a weak transmission.
  • If it starts squealing loudly or stops spinning mid-cycle, stop using it.

When you shop, top-loaders with an agitator are still around if you liked this style. Good luck, David!

Still stuck, or is your situation different?Ask your own question and a technician will answer it for free.
💬 Ask a Follow-Up Question
(346) 625-4289Tap to Call · Same-Day