Hi Scott, thanks for the full model and serial, that makes it easier. You’ve actually got two separate problems, and they come from two different parts.
1. Buttons pressing the wrong thing
When you press Start and the range thinks you pressed Cancel or the temperature, but it still beeps on every touch, that’s almost always the touchpad (membrane keypad) wearing out. The keypad is a thin sheet of circuits under the glass or plastic overlay. After years of heat and grease, the layers start shorting into each other, so one press reads as a different key. It beeps because the control board does see a press, just the wrong one.
On your GGE388LXB, the keypad is often sold together with the control panel as one assembly. Look up your full model number on a parts site and check the “Control panel” diagram. If they list the touchpad separately, that’s the cheaper fix. If the board is also failing (random beeping or settings changing with nobody touching it), you’d replace both.
2. A burner stuck on high
A burner that stays on high until you turn the knob down and back is a classic sign of a worn infinite switch, the part right behind that knob. Inside it are contacts that cycle the element on and off to make low and medium heat. When they wear or stick together, the element just stays on full power. Each burner has its own switch, so you only need the one for that burner. It’s an inexpensive part.
Please don’t wait on this one. A burner that won’t turn down can scorch a pan or start a fire if someone walks away.
Always turn off the breaker before working on either part. If you’re comfortable with a screwdriver and the wiring, both are doable at home. Snap a photo of the wires before you take them off. Hope this helps, and if you want me to check a part number before you order, send it through the form.

