Technician Answers

Whirlpool WTW5000DW1 washer squeals loudly in spin: what causes it?

Answered by GIR Technician, GIR Appliance Repair · November 4, 2026
❓ The question
Whirlpool Washer Model WTW5000DW1 Age: 8–12 years

“What causes a loud high pitch squealing in spin mode”

Asked by Steve from CO · November 3, 2026
GIR Technician
GIR TechnicianAppliance technician · GIR Appliance Repair, The Woodlands, TX
✓ Technician answer

Hi Steve, a loud high-pitched squeal right when your washer goes into spin is one of the most common sounds on this Whirlpool, and the good news is it’s usually the cheapest fix. Quick note first: the model you entered (WRW50000DW1) looks like a small typo for WTW5000DW1. Please double-check the tag under the lid, because that’s the model I’m answering for.

Most likely cause: the drive belt

Your washer uses a rubber belt between the motor and the transmission. After 8–12 years that belt gets glazed, stretched or cracked, and when spin starts and the load gets heavy, it slips on the pulley and squeals. It’s often loudest at the start of spin and can come with a faint burnt-rubber smell.

How to check it yourself

  1. Unplug the washer and turn off the water.
  2. With the tub empty, tip the washer back against a wall (a helper makes this easy) so you can see underneath.
  3. Look at the belt: shiny, cracked, frayed or loose means it’s done. You should not be able to twist it much more than a quarter turn.
  4. While you’re there, spin the motor pulley by hand. It should turn smoothly and quietly. If it grinds or feels rough, the motor bearings are the problem instead.
  5. Back on its feet, turn the empty basket by hand. A smooth, quiet turn with some resistance is normal. Scraping or a dragging feel points to the transmission (gearcase), which is a bigger repair.

If it’s the belt

Replacing it is very doable from underneath with the washer tipped back: the old belt comes off the motor and transmission pulleys, and the new one goes on the same way. Plan on about 30 minutes with basic tools. I’ve listed the exact belt for your model below.

If the belt looks new and the squeal is still there, send a follow-up and tell me exactly when the noise starts and stops, or attach a short video. That helps me pin it down quickly.

🔧 Part needed
Drive belt
Part # W10006384 Fits Whirlpool WTW5000DW1

The usual cause of a high-pitched squeal at the start of spin. Replace it if it looks glazed, cracked or loose.

Want us to get this part for you? We source genuine parts through our supplier network. Send a quick request and we'll email you the current price and availability, usually within one business day. No obligation.
Still stuck, or is your situation different?Ask your own question and a technician will answer it for free.
💬 Ask a Follow-Up Question
(346) 625-4289Tap to Call · Same-Day