Technician Answers

KitchenAid KDTE554CSS3 dishwasher panel won’t light, even after a new control board

Answered by GIR Technician, GIR Appliance Repair · November 7, 2026
❓ The question
Whirlpool Dishwasher Model KDTE554CSS3 Age: 8–12 years

“Is it worth repairing”

Plug it in I get initial power initiation, but the control panel does not light up. I was told to replace the control board which I have and yet it’s still doing the exact same thing.

Asked by Dennis from CA · November 5, 2026
GIR Technician
GIR TechnicianAppliance technician · GIR Appliance Repair, The Woodlands, TX
✓ Technician answer

Hi Dennis, that’s frustrating, especially after you’ve already paid for a control board. The good news is that the new board narrows it down. If the dishwasher gives you a sign of power when you plug it in but the panel stays dark, and a new board didn’t change anything, the problem is most likely between the board and the buttons, not the board itself. Your KDTE554CSS3 is a KitchenAid built by Whirlpool, and on these I’d check three things in this order.

1. The connectors and the new board

Turn off the breaker first. Then open the door, take the screws out of the inner door panel and look at the board again. Make sure every plug is pushed all the way in, especially the wide flat plug that runs up to the touch panel. A plug that’s half seated is the most common reason a new board “doesn’t work”. Also check that the part number on the board you bought matches the one listed for your model (W10796284 on the parts diagram for the KDTE554CSS3).

2. The door latch switch

The control needs to know the door is shut and latched. With power off, unplug the latch and test it with a multimeter: it should read closed (continuity) when you push the latch shut and open when you release it. A latch that never closes can leave the dishwasher looking dead.

3. The touch panel (console)

On your model the buttons and lights are a separate part from the control board, built into the console along the top of the door. If the plugs are good and the latch tests fine, the console is the next suspect, and it’s the most likely one when the board has already been replaced.

Is it worth repairing?

At 8 to 12 years old, a KitchenAid like yours is still worth one more part, as long as the tub doesn’t leak and it was cleaning well before this. If it ends up needing more than a latch or a console, that’s when I’d start comparing it with a new dishwasher. Our repair or replace calculator can help you weigh it.

I’ve listed both parts for your exact model below, with a note on when you’d need each one. If you test the latch, send a follow-up with what you find and I’ll help you with the next step.

🔧 Part needed
Console assembly (touch panel)
Part # W10584485 Fits Whirlpool KDTE554CSS3

If the board connectors are tight and the latch tests fine, but the buttons still never light. We'll confirm the finish matches your door.

Door latch assembly (includes switch)
Part # W10653840 Fits Whirlpool KDTE554CSS3

If the latch switch shows no continuity with the door closed and latched.

Want us to get this part for you? We source genuine parts through our supplier network. Send a quick request and we'll email you the current price and availability, usually within one business day. No obligation.
Still stuck, or is your situation different?Ask your own question and a technician will answer it for free.
💬 Ask a Follow-Up Question
(346) 625-4289Tap to Call · Same-Day