Hi Diane, nice to hear from you again, and I’m sorry the old one is at the end of its life (this follows up on your earlier question). Good news: in almost every case, a current standard 24-inch Bosch fits the space your 2013 Bosch came out of. Bosch has kept the same basic size for years, and your old one is a standard full-size model.
The three measurements to check
Measure the opening, not the old dishwasher:
- Width: 24 inches between the cabinets. Bosch full-size models are just under that.
- Height: from the floor to the underside of the countertop, usually about 34 inches. Bosch’s standard models are about 33 7/8 inches and the legs adjust upward a little, so check that your opening is at least that tall, especially if a new floor was laid since 2013.
- Depth: at least 24 inches from the back wall to the front of the cabinets.
The exceptions
- 18-inch models are narrower, so skip those.
- ADA models are shorter, made for lower counters. They would fit, but leave a gap at the top.
- Panel-ready models need a custom wood panel on the door. Choose stainless, black or white unless you want to match your cabinets.
Hookups
The water line, drain hose and electrical connection are in the same place on the new ones, so the installer can usually reuse your water line. Many new Bosch dishwashers don’t come with a power cord, so check whether your old one was plugged in or wired directly, and buy the cord or hookup kit with it if needed.
Take a quick photo of the opening and the connections under the sink before the old one goes out. If anything looks different, send it to me and I’ll take a look.

