Technician Answers

Kenmore 110.27086603 washer is very loud on spin but doesn’t vibrate

Answered by GIR Technician, GIR Appliance Repair · November 10, 2026
❓ The question
Kenmore Washer Model 110.27086603 Age: Over 12 years

“excessive noise when spinning only no vibration”

Asked by Don from NY · November 8, 2026
GIR Technician
GIR TechnicianAppliance technician · GIR Appliance Repair, The Woodlands, TX
✓ Technician answer

Hi Don,

A washer that stays steady but gets loud on spin is a different problem from one that shakes. The noise is coming from something that turns, not from an unbalanced load. Your Kenmore 110 was built by Whirlpool, and on this top-load design there are three usual causes.

1. Something stuck between the tubs (check first)

Coins, bra wires, and buttons can slip through the holes and rattle or scrape between the inner basket and outer tub. The noise is usually a scraping, clicking, or rattling that gets faster as the spin speeds up. Shine a flashlight through the basket holes and listen while you turn the basket slowly by hand.

2. The drain pump

If the noise is loudest at the start of the spin while water is still pumping out, and then fades, the pump may have a worn impeller or a small object in it. Try a Drain/Spin only cycle and listen at the lower front of the washer.

3. Worn tub bearing (most likely on a 12+ year old machine)

A roar or growl, like a jet engine, that gets louder as the spin speeds up is the classic bearing sound. With the washer empty and unplugged, spin the basket by hand. If it feels rough, grinds, or rumbles instead of gliding smoothly, the bearing is worn. Water slowly getting past the seal over the years is what wears them out.

Is it worth fixing?

Honest answer: if it's an object or the pump, yes, both are inexpensive fixes. If it's the bearing, on this design the bearing comes built into the outer tub assembly, so it's a big part and a lot of labor. On a washer over 12 years old, most people replace it at that point. Our repair or replace calculator can help you think it through, and this answer on a similar Kenmore 110 covers the same washer family.

I've listed the drain pump and the outer tub (with bearing) below for the two parts-related causes. We'll match the exact numbers to your model, and you can check price and availability right there.

If you can describe the noise (roar, scrape, or rattle) or tell me what you found turning the basket by hand, send a follow-up and I'll help you narrow it down.

🔧 Part needed
Drain pump
Fits Kenmore 110.27086603

If the noise is loudest while water pumps out at the start of spin and the basket turns smoothly by hand. We'll match the exact part # to your 110.27086603.

Outer tub with bearing
Fits Kenmore 110.27086603

If the basket feels rough or grinds when turned by hand and it roars on high spin. We'll match the exact part # to your 110.27086603.

Want us to get this part for you? We source genuine parts through our supplier network. Send a quick request and we'll email you the current price and availability, usually within one business day. No obligation.
Still stuck, or is your situation different?Ask your own question and a technician will answer it for free.
💬 Ask a Follow-Up Question
(346) 625-4289Tap to Call · Same-Day