Technician Answers

Maytag MED6000XW1 dryer clunked and now the drum won’t turn

Answered by GIR Technician, GIR Appliance Repair · November 10, 2026
❓ The question
Maytag Dryer Model MED6000XW1 Age: Over 12 years

“What would make the Dryer quit turning??”

Was making a clunking sound and now has quit. The belt is fine. Relay and power is good.

Asked by Sweetness from LA · November 9, 2026
GIR Technician
GIR TechnicianAppliance technician · GIR Appliance Repair, The Woodlands, TX
✓ Technician answer

Hi Sweetness,

A clunk and then nothing usually means something mechanical gave out. Since you’ve already checked the belt and power, we can narrow this down fast. The big clue is what you hear when you press Start.

First: what does it sound like?

  • Nothing at all: the motor isn’t getting power. Go to the thermal fuse and door switch below.
  • A hum but no turning: the motor is trying but something is jammed or seized. That points to the motor itself, a seized drum roller or a stuck idler pulley.
  • Motor runs but the drum doesn’t move: the belt is slipping off the motor pulley, usually because the idler pulley or its spring broke. That’s often the clunk.

Checks I’d do, easiest first

Unplug the dryer before you open anything.

  1. Thermal fuse. On this electric Maytag, it sits on the blower housing at the back. When it blows, the motor won’t run at all. Test it for continuity. If it’s open, replace it, and clean the vent too, because a blocked vent is what usually blows it.
  2. Door switch. Listen for a click when you press the switch by hand, or test it with a meter.
  3. Idler and rollers. With the front panel off, slip the belt off and spin the drum by hand. It should turn smoothly. If it grinds or drags, the drum rollers are worn. Check that the idler pulley spins freely and the arm isn’t broken.
  4. Motor. With the belt off, try to turn the motor pulley by hand. If it’s locked, or it just hums with power reaching it, the motor has failed.

I’ve listed the thermal fuse and motor for your model below, so you can check price and availability right there. Do the fuse test first, since it’s the cheapest part.

Is it worth fixing?

Your dryer is over 12 years old, so how much to spend depends on the cause. A fuse, idler or rollers is a cheap fix and worth doing. A motor is roughly $100–$200 for the part, and that’s when replacing starts to make sense. Our repair-or-replace tool can help you decide. There’s also a similar case in this answer: dryer drum not turning.

Tell me whether it hums or stays silent and what the fuse reads, and I’ll help you finish it off. Just send a follow-up.

🔧 Part needed
Thermal fuse
Part # 3392519 Fits Maytag MED6000XW1

If the motor makes no sound at all and this fuse tests open (no continuity).

Drive motor
Part # W10396038 Fits Maytag MED6000XW1

If the fuse and door switch are good but the motor hums, won't turn, or is silent with power reaching it.

Want us to get this part for you? We source genuine parts through our supplier network. Send a quick request and we'll email you the current price and availability, usually within one business day. No obligation.
Still stuck, or is your situation different?Ask your own question and a technician will answer it for free.
💬 Ask a Follow-Up Question
(346) 625-4289Tap to Call · Same-Day