Technician Answers

Kenmore 110.26732500 washer leaves clothes very wet after the spin cycle

Answered by GIR Technician, GIR Appliance Repair · November 11, 2026
❓ The question
Kenmore Washer Model 110.26732500 Age: Over 12 years

“After spin cycle, clothes remain very wet.”

Recently noticed clothes remain with excessive water after wash cycle is complete.

Asked by Ron from OK · November 11, 2026
GIR Technician
GIR TechnicianAppliance technician · GIR Appliance Repair, The Woodlands, TX
✓ Technician answer

Hi Ron,

Clothes coming out soaking wet usually means one of two things. Either the water isn’t draining all the way, or the tub isn’t spinning fast enough to throw the water out. Your Kenmore 110 was built by Whirlpool, and both problems are common on these older machines. You can usually tell which one you have in a few minutes.

Rule out the easy stuff

  • Load size: one heavy item, like a bath mat or a pair of jeans, or a tightly packed tub can throw the load off balance. The washer then slows the spin to protect itself. Try a normal, evenly spread load.
  • Cycle: on the Delicate and Hand Wash cycles the spin is slow on purpose. Check the result on a Normal or Heavy cycle.
  • Drain hose and standpipe: unplug the washer, make sure the hose behind it isn’t kinked, and pour a bucket of water down the wall pipe to make sure it isn’t slow.

Watch the end of the cycle

Run a load and stop it right after the final spin:

  1. Water left in the tub: the washer isn’t draining well. A partly blocked or worn drain pump can move water slowly enough that the spin ends before the tub is empty. Take the hoses off the pump and check for lint or a small sock. If it’s clear and still slow, the pump is the part to replace.
  2. Tub is empty but the clothes are wet: the tub isn’t coming up to speed. On many older Whirlpool-built top-loaders, a worn clutch is the classic cause. Unplug the washer, tip it back a little and look on the floor underneath. Brown or black dust from the clutch lining is a strong sign the clutch is worn. Another clue is a tub that turns slowly and easily when you’d expect it to be spinning hard.

I’ve listed both parts below, so you can check the price and availability there.

Repair or replace?

A drain pump is an easy, cheap repair. A clutch costs more in labor because the tub has to come apart, but the part itself is reasonably priced. On a 12+ year old machine that otherwise runs well, it’s often still worth doing. Our repair or replace tool can help you decide. If the washer also bangs or stops during spin, this Kenmore off-balance spin answer may help.

Tell me what you find at the end of the cycle and I’ll point you to the right fix. Just send a follow-up.

🔧 Part needed
Drain pump
Fits Kenmore 110.26732500

If water is still sitting in the tub at the end of the cycle and the hoses and standpipe are clear. We'll match the exact part # to your 110.26732500.

Clutch assembly
Fits Kenmore 110.26732500

If the tub drains fully but spins slowly and you find brown dust under the washer. We'll match the exact part # to your 110.26732500.

Want us to get this part for you? We source genuine parts through our supplier network. Send a quick request and we'll email you the current price and availability, usually within one business day. No obligation.
Still stuck, or is your situation different?Ask your own question and a technician will answer it for free.
💬 Ask a Follow-Up Question
(346) 625-4289Tap to Call · Same-Day