Technician Answers

How do I replace my GE Profile PVM1870DM3WW over-the-range microwave with a similar one?

Answered by GIR Technician, GIR Appliance Repair · November 15, 2026
❓ The question
GE Microwave Model PVM1870DM3WW Age: Over 12 years

“How to replace a similar one?”

Asked by Dan from TX · November 15, 2026
GIR Technician
GIR TechnicianAppliance technician · GIR Appliance Repair, The Woodlands, TX
✓ Technician answer

Hi Dan,

A GE Profile over-the-range microwave that’s 12+ years old has given you good service, so replacing it rather than repairing it makes a lot of sense. The good news is that swapping one over-the-range microwave for another is very doable if you plan ahead. Here’s what I’d check before you buy.

Pick a replacement that fits the same space

  • Width: almost all over-the-range microwaves, including your PVM1870DM3WW, are built for a 30-inch-wide opening between cabinets. Measure yours to confirm.
  • Height: measure from the bottom of the upper cabinet to the cooktop. Most installs need roughly 30 inches or more of clearance there. Check the new model’s installation guide for its exact minimum before you buy.
  • Venting: look at how yours vents now. If there’s a duct going up through the cabinet or out the back wall, buy a model that supports external venting and set it up the same way. If it just blows back into the kitchen, any model with recirculating (charcoal filter) venting will work.
  • Power: the plug usually goes into an outlet inside the upper cabinet. Make sure the new cord will reach it.

How the swap goes

  1. Turn off the breaker, then unplug the old unit from the outlet in the cabinet.
  2. Have a second person hold the microwave up. Inside the upper cabinet, take out the top bolts (usually two or three). Tilt the microwave forward and lift it off the hooks on the wall plate. These units weigh 50–70 lbs, so don’t do this alone.
  3. Remove the old wall mounting plate. Every new microwave comes with its own plate and paper templates, and the bolt holes rarely line up exactly with the old ones. Use the new templates and patch or reuse holes as needed.
  4. Mount the new plate into at least one wall stud. Hang the microwave on it, then bolt it through the cabinet and plug it in.

If you’re torn between replacing it and fixing it, our repair-or-replace tool can help you weigh it. At this age, though, replacing is usually the better choice unless the problem is something small like a door switch.

If you have questions once you’ve picked a model, just send a follow-up. Glad to help.

Want us to take a look?

We’re a local company that services the Houston area, and we can often come out the same or next day. Call or text (346) 625-4289, or see our microwave repair and installation services and our Houston service area. If you’d like us to check the old unit first, text a short video of what it’s doing so the tech brings the right part.

Still stuck, or is your situation different?Ask your own question and a technician will answer it for free.
💬 Ask a Follow-Up Question
(346) 625-4289Tap to Call · Same-Day