Hi David, thank you for the clear description, and I’m sorry you’re dealing with an oily floor. I’ll be honest with you, since you asked if it’s time for a new machine.
What the oil means
Your Roper RAS8445JQ0 is a Whirlpool-built direct-drive top-loader. Underneath it there’s a transmission (the gearcase) that is filled with oil. Oil on the floor, along with new noises, almost always means the transmission seal is leaking or the transmission itself is wearing out. As it loses oil, it gets noisier and eventually stops agitating or spinning properly.
Grease from the bearings doesn’t usually make a puddle. Oil on tile is almost always the transmission.
Is it worth repairing?
A transmission replacement on this washer is possible, and these are well-built machines. But with the part plus labor, you’d be spending a good share of a new washer’s price on a machine that is already 12+ years old. You also mentioned the lid switch acting up, and that would be one more repair on top of it.
My honest advice: this is the right time to replace it. If you’re handy and want to keep it going a little longer, the lid switch on its own is cheap and easy, but it won’t fix the leak.
Until then
- Put a tray or towels underneath it so the oil doesn’t soak into grout.
- Don’t overload it, since heavy loads strain a weak transmission.
- If it starts squealing loudly or stops spinning mid-cycle, stop using it.
When you shop, top-loaders with an agitator are still around if you liked this style. Good luck, David!

