Hi Jonnie,
A Bosch that drains fine most of the time but leaves water behind now and then usually has something partly blocking the drain path. It’s often a small piece of debris that moves around. These checks are easy to do yourself, so start here before buying anything.
Check these first, in order
- Filter: twist out the round filter in the bottom of the tub, pull the flat mesh screen out with it, and rinse both under the tap. Scrub off any greasy film with a soft brush.
- Pump cover: with the filter out, scoop or sponge out the standing water. Look down the opening and you’ll see a small cover (usually white or gray) held by a clip. Pop it off with a spoon handle and look underneath. Bits of glass, seeds, labels and twist ties often hide here and jam the pump only some of the time. With the power off, check that the impeller blades underneath turn by hand.
- Disposal: if the dishwasher drains into a garbage disposal, run the disposal before each load. A disposal that’s full or partly blocked is one of the most common causes of drain trouble that comes and goes.
- Drain hose: make sure the hose under the sink isn’t kinked and that it loops up high before it connects to the drain. If you have an air gap on the countertop, clean it out.
If it still happens
If everything above is clean and it still leaves water sometimes, the drain pump is the likely cause. Bosch pumps get weak with age, and a pump that buzzes but won’t move water on some cycles is a common failure on dishwashers that are 12+ years old. If the display ever shows E24 or E25, write the code down. Those are Bosch’s drain codes, and they help confirm it’s a drain blockage or pump problem. I’ve listed the part below. You can check the price and availability there, and we’ll match the exact part number to your model.
Replacing a drain pump is a reasonable repair even on an older Bosch, as long as the tub isn’t leaking and the controls work well. If you’re unsure, our repair or replace tool can help. This Bosch drain-code answer covers what to do if the cleaning doesn’t solve it.
Turn off the power at the breaker before you reach under the sink or remove the kick plate. If you find something or want help with the next step, just send a follow-up.

